HP StoreOnce VSA Deployment and Configuration Guide (TC458-96024)

To create a 1 TB virtual disk
NOTE: If you create virtual disks before power on, the first boot script incorporates the commands
to prepare and add the storage to the StoreOnce VSA. If you create virtual disks after power on,
you must apply the StoreOnce CLI commands manually, as described in To prepare and add
storage using the StoreOnce CLI and reboot the VSA for automatic addition of the Instant-On
license.
1. From the VSphere client, expand the vCenter server and select the HP StoreOnce VSA.
2. Select the Summary tab. This displays information about deployment, including the resources
and disk storage.
3. Click on Edit Settings... in the Commands.
NOTE: You can also right-click on the StoreOnce VSA in the Navigation pane and select
Edit Settings... from the menu.
4. With the Hardware tab selected, click Add...
40 Deployment on VMware vSphere