HP StoreOnce VSA Deployment and Configuration Guide (TC458-96024)

10. Use the Properties dialog to configure DNS Server Settings (up to 3) and edit Ethernet0 settings
and Ethernet1 settings, if required. The default deployment is DHCP. After deployment, network
settings may be amended using StoreOnce CLI commands. See the HP StoreOnce Backup
system CLI reference guide for further details.
11. Check the Summary screen and click Finish to start the deployment process. (Leave the Power
on after deployment box unchecked so that you can add datastores before the StoreOnce
VSA is powered on.)
38 Deployment on VMware vSphere