HP QLogic Converged Network Adapter Installation Guide (747713-001, September 2013)

Figure 24 Adapter Settings display
2. To scan the Fibre Channel SAN for configured devices from the Fast!UTIL Options menu, select
Scan Fibre Devices, and then press Enter.
This screen displays the first LUN for each storage device detected. This is a useful
troubleshooting tool for zoning issues (see Figure 25 (page 26)).
CAUTION: This utility provides many options and parameters. Do not change any parameters
unless instructed by HP technical support.
Figure 25 Scan Fibre Devices display
HP Restricted26 Troubleshooting