Manualshelf

HP StoreEver MSL6480 Tape Library User and Service Guide

ManualsBrandsHP ManualsStorageHP StoreEver MSL6480 Scalable Base Module
919293949596979899100
2
1
1
Installing the new tape drive
1. Align the guides on the side of the drive assembly with the guide rails in the drive bay. Slowly
insert the new tape drive into the drive bay while supporting the drive assembly. The tape
drive should be flush with the back panel of the device.
2. Tighten the captive thumbscrews with your fingers until the tape drive is secure.
1
2
Connecting the SAS cable
1. Attach the HBA end of the SAS cable into the connector on the HBA. If you are using a SAS
fanout cable, the end of the cable with only one connector should be plugged into the HBA.
98 Upgrading and servicing the library