HP StoreEver MSL6480 Tape Library User and Service Guide

• Gateway — The gateway used when DHCP is not enabled.
• DNS 1
• DNS 2
IPv6 settings
• Stateless Addressing — When Enabled, the device will generate an address for itself based
on the routing information obtained from a router advertisement and the MAC address. The
device can manage up to five global addresses at the same time, which can be assigned from
different routers.
• Static Addressing — When Enabled, the library will use a statically-configured address.
• Static Assigned Address — The IPv6 address when Static Addressing Enabled is On.
Viewing Command View TL status
Figure 44 Status > Command View TL screen
Library information
• Name — Library name displayed in Command View TL
• Serial Number — Base module serial number reported to Command View TL.
• Management URL — Management station URL, including port. For example:
http://192.0.2.24:8099.
Product information
• Name — Product name reported to Command View TL. Will always be MSL6480.
• Version — Library firmware version reported to Command View TL.
Contact information
• Name — Name of the person to contact about management of the library
• Phone — Phone number of the contact person
• Email — E-mail address of the contact person
92 Operating the library