HP StoreEver MSL6480 Tape Library User and Service Guide

Viewing network status
Figure 43 Status > Network screen
In the Status > Network screen you can see:
• Host Name — Library hostname
• Domain Name
• Protocol — IPV4 or IPv6
• MAC Address— A unique identifier for the library controller network interface
• Link Status — Enabled or disabled
• Link Speed — Speed of the Ethernet connection to the library
• Duplex — Enabled or disabled
IPv4 settings
• DHCP — When Enabled, the library requests an IP address from a DHCP server each time
the library is powered on.
• Address — IP address in use by the library. If DHCP is enabled, this address was obtained
from the DHCP server. When DHCP is not enabled, the address was configured.
• Netmask — The network mask of the library controller used when DHCP is not enabled.
Viewing status information 91