HP StoreEver MSL6480 Tape Library User and Service Guide

• WWide Node Name — A world wide unique identifier that the library reports over SCSI and
can be used by operating systems or software applications to identify and track the library.
• Product ID — Always MSL6480
• Firmware Revision — Version of the currently installed library firmware
• Robotic Firmware Revision — Version of the currently installed robotic assembly firmware.
The robotic assembly firmware is bundled and installed with the library firmware.
• Barcode Reader Firmware Revision — Version of the currently installed barcode reader
firmware. The barcode reader firmware is bundled and installed with the library firmware.
Library status
• Library Status
Idle — The library robotic is ready to perform an action.◦
◦ Moving — The library robotic is moving a cartridge.
◦ Scanning — The library robotic is performing an inventory of cartridges.
◦ Offline — The library robotic has been taken off line by the library.
• Cartridge in Transport — When applicable, displays the barcode label of the cartridge currently
in the robotic assembly
• Total Power On Time — Total time that the base module has been powered on since it was
manufactured
• Odometer — Robotic assembly move count
Module status
• Base Controller Revision or Module Controller Revision — Hardware revision of the controller
board currently installed in the module.
• Power Supply Status — Displays the status of power redundancy.
• Lower Power Supply Fan — Displays the status of the lower power supply fan. If a fan is not
operating correctly, the library generates a warning event.
• Upper Power Supply Fan — Displays the status of the upper power supply fan. If a fan is not
operating correctly, the library generates a warning event.
• Left Drive Power Board Status — Status of the drive power board (DC-DC converter) for the
top three half-height drive slots in the module.
• Right Drive Power Board Status — Status of the drive power board (DC-DC converter) for the
lower three half-height drive slots in the module.
• Chassis Fan — Displays the status of the chassis fan. If a fan is not operating correctly, the
library generates a warning event.
Using the cartridge inventory modular view
In the Status > Cartridge Inventory > Graphical View screen you can see a graphical representation
of the cartridges in each module. Expand the module section to see the inventory for that module.
Elements containing media are designated with a barcode label. Hover over a cartridge to see
information about that cartridge.
84 Operating the library