HP StoreEver MSL6480 Tape Library User and Service Guide

NOTE: If the drive has difficulty ejecting the cartridge, suspect bad or damaged media.
Figure 40 Operation > Force Drive Media Eject screen
1. Navigate to the Operation > Force Drive Media Eject screen.
2. Select the drive in the Source Elements list.
3. Select the destination in the Destination Elements list.
4. Click Submit.
Viewing status information
To access the status area, from the Home screen, click or tap Status.
Viewing library and module status
Summary information and status is displayed in the top banner and left side bar. For additional
library module configuration and status information navigate to the Status > Library Status screen.
Library information
• Vendor — Always HP
• Serial Number — Library serial number
• Robotic Hardware Revision
• Barcode Reader Hardware Revision
Viewing status information 83