HP StoreEver MSL6480 Tape Library User and Service Guide

Figure 24 Maintenance > Library Tests > Element to Element Test screen
To run the element test:
1. Navigate to the Maintenance > Library Tests > Element to Element Test screen.
2. Select a cartridge from the Source Elements list.
To select from a subset of the cartridges:
a. Click Filter On.
b. Enter characters into the search box and then click Search.
The Source Elements list is updated to only include cartridges with a barcode label
including the search characters.
3. Select a location from the Destination Elements list.
4. Select the number of cycles.
5. Click Start Test.
Performing the wellness test
The wellness test exercises basic library functionality. At the end of the test, cartridges will be in
different storage slots. The test will take the library offline to hosts for the duration of the test.
CAUTION: The test can move cartridges between partitions.
72 Operating the library