HP StoreEver MSL6480 Tape Library User and Service Guide

Figure 20 Configuration > Command View TL screen
Library information
• Name — The name of the library that will be displayed in the Command View TL interface.
The default is HP MSL6480 <serial number>.
• Serial Number — The serial number of the base module. This cannot be modified.
• Management URL — The URL of the management station, including port. For example:
http://192.0.2.24:8099.
Product information
• Name — HP MSL6480. This cannot be modified.
• Version — Library firmware version.
Contact information
• Name — Name of the person to contact about management of the library.
• Phone — Phone number of the contact person.
• Email — E-mail address of the contact person.
Enabling SSL or SSH
Enable or disable secure access to the RMI using Secure Socket Layer (SSL) or Secure Shell (SSH)
from the Configuration > Web Management screen. When SSL is enabled, connections to the RMI
must use HTTPS. The default is disabled.
When SSH is enabled, the library will only accept SSH connections. The default is disabled. A
service user login is required to enable SSH.
Configuring the library 67