HP StoreEver MSL6480 Tape Library User and Service Guide

Figure 19 Configuration > User Accounts screen
Select the user and then enter the new password twice. The password must contain 8-16 characters,
which can include upper and lower case letters, numbers, and special characters
Restricting RMI access for the administrator and security users
To restrict RMI access for the administrator and security users, check Restricted Remote Management
Interface (RMI) Login. This can be used in high secure environments where policies require all
configuration changes to occur from the physical library front panel. Note that many settings cannot
be configured from the OCP.
The user and service users will still be able to log in with the RMI. To remove all RMI access, unplug
the Ethernet cable from the library controller.
Allowing magazine and mailslot access for the “user” user
By default, only the administrator and security users are allowed to open the mailslots or magazines.
The administrator and security users can enable the “user” user account to access to the magazines
and mailslots.
• To allow access the magazines, check Allow magazine access by the “user” user account.
• To allow access to the mailslots, check Allow mailslot access by the “user” user account.
Configuring Command View TL integration
The Configuration > Command View TL Configuration screen displays information relevant to
integration with Command View TL and allows configuration of integration settings.
SNMP must be enabled for Command View TL integration to function. See “Configuring SNMP”
(page 49).
66 Operating the library