HP StoreEver MSL6480 Tape Library User and Service Guide

1. Navigate to the Configuration > Encryption > USB — MSL Encryption Kit screen.
2. Verify that the correct token is available.
3. Enter the Token PIN and then click Submit.
Changing the token PIN
Figure 16 Changing the PIN or token name
1. Navigate to the Configuration > Encryption > USB — MSL Encryption Kit screen.
2. Expand the Pin Management section.
3. Enter the current and new PINs.
The PIN must be at least 8 characters and no longer than 16 characters. The PIN must contain
at least one lower case letter, one upper case letter, and at least two digits.
4. Click Submit.
CAUTION: The key server token protects the encryption keys with a PIN. If you lose the PIN, you
will not be able to restore data from your encrypted tapes using that token. Neither you nor a
service engineer can recover a lost PIN. Keep a copy of the PIN in a safe place.
Changing the token name
1. Navigate to the Configuration > Encryption > USB — MSL Encryption Kit screen.
2. Expand the Pin Management section.
3. Enter the new token name. The name can have up to 126 characters.
60 Operating the library