HP StoreEver MSL6480 Tape Library User and Service Guide

Figure 11 Configuration > Network Management > SNMP screen
• SNMP Enabled — When checked, the library can be managed by computers listed in the
SNMP Target IP Addresses field.
• Community Name — A string used to match the SNMP management station and library. It
must be set to the same name on both the management station and the library. The default
community name is public.
• SNMP Targets — List of configured SNMP targets.
To add an SNMP target or edit information for an SNMP target:
1. Click Edit for the appropriate SNMP target. When adding an SNMP target, click Edit next to
a target without an IP/Hostname.
2. Enter the target IP address or hostname.
3. Enter the port.
4. Select the SNMP version.
5. Enter the SNMP community string for the target.
6. Click Submit.
To delete an SNMP target:
1. Click Delete for the target to be deleted.
2. Click Submit.
Configuring event notification parameters
From the Configuration > Network Management > SMTP screen you can enable SMTP (Simple
Mail Transfer Protocol) functionality and configure e-mail notification of library events. The library
must have network access to an SMTP server.
50 Operating the library