HP StoreEver MSL6480 Tape Library User and Service Guide

1. Click SNTP.
Figure 8 Configuring the SNTP server
2. Click SNTP Enabled.
3. Enter the SNTP server address.
4. Click Submit.
Configuring media barcode compatibility checking
From the Configuration > System > Media Barcode Compatibility Check screen you can enable or
disable the barcode media ID check.
Figure 9 Configuration > System > Media Barcode Compatibility Check screen
When Barcode Media ID Restriction is enabled, the library will only allow appropriate tape
cartridges to be loaded into tape drives. The barcode media ID is the last two characters of the
barcode. For example, an LTO-6 labeled cartridge will not be allowed to move into an LTO-4 tape
drive.
When disabled, the library will move any tape to any tape drive. If the cartridge is incompatible
with the tape drive, the library will display a message.
NOTE: Barcode labels are required on all cartridges in the library. For efficient operation, include
the correct media ID on the label and keep the Barcode Media ID Restriction option enabled (the
default setting).
Configuring the library 47