HP StoreEver MSL6480 Tape Library User and Service Guide

◦ Firmware — The library firmware version
◦ EK Token — Information about the key server token when using the MSL Encryption Kit
• Module status overviews — a summary of each module’s configuration and health
Click or tap the module status area to select the module.
◦ Module health icon
The green check mark Status OK icon indicates that the module and each of its
components are fully operational and that no user intervention is required.
–
– The yellow triangle explanation point Status Warning icon indicates that user attention
is necessary, but that the library can still perform most operations.
– The red circle X Status Error icon indicates that user intervention is required and the
module is not capable of performing some operations.
◦ Module number — Modules are numbered based on their location in the physical library.
The bottom module is Module 1. The base library module is annotated with (Base).
◦ Drive status — The number of drives installed in the module and the health of each drive
Click or tap on the drive to display drive configuration and status information in the center
pane.
– A black square indicates that the drive is fully operational and that no user intervention
is required.
– A yellow square indicates that user attention is necessary, but that the drive can still
perform most operations.
– A red square indicates that user intervention is required or the drive is not capable
of performing some operations.
◦ Magazine slot usage — The number of cartridge slots available and the number in use
◦ Drive operation status — The current drive activity for each drive in the module. The drive
operation status is only displayed for the selected module.
– Write — the drive is performing a write operation.
– Read — the drive is performing a read operation.
– Idle — a cartridge is in the drive but the drive is not performing an operation.
– Empty — the drive is empty
– Encryp — the drive is writing encrypted data.
Center pane
• Open Mailslot — (Administrator user only) Click or tap to unlock the mailslot on the selected
module. Mailslots must be enabled before the slots can be used as mailslots. See “Enabling
or disabling mailslots” (page 54).
• Open Magazine — (Administrator user only) Click or tap to unlock a magazine in the selected
module. Only one magazine in the library can be open at a time. See “Opening a magazine”
(page 80).
• Configuration — (Administrator user only) Click or tap to configure the library. See “Configuring
the library” (page 43).
• Maintenance — (Administrator user only) Click or tap to access maintenance functions. See
“Maintaining the library” (page 70).
42 Operating the library