HP StoreEver MSL6480 Tape Library User and Service Guide

Table 29 Default settings (continued)
Reset to default?Default settingParameter
MSL6480Library product ID — INQUIRY
product ID string (Std Inquiry page)
HPLibrary vendor ID — INQUIRY vendor
ID string (Std Inquiry page)
MSL6480Library product ID — IN QUIRY
product ID string (INQ page CC)
HPLibrary vendor ID — INQUIRY vendor
ID string (INQ page CC)
YesStarting element addresses in decimal:SCSI element addressing
• Slot: 1001
• Picker: NA
• Drives: 1
• I/E slots: 101
Values in hex:
• Slot: 0x3E9
• Picker: NA
• Drives: 0x1
• I/E slots: 0x65
Miscellaneous settings
EnabledReturn drive serial numbers to host
EnabledReturn barcodes to host (RES SCSI
data)
Yes8 digits, left justifiedBarcode format and length returned
to host
YesEnglishLanguage settings
EnabledAuto unload (library controlled unload)
YesContinuous, all levels selectedLog tracing
YesDisabledIgnore barcode media ID
Disabled, configuration retained where
possible
DisabledAll licensed features
Not deletedNot applicableLicenses
OCP
Yes8 digits, left justifiedBarcode format displayed on OCP
NoOCP contrast
YesScreen saver
Drive defaults
YesAuto speed/FabricDrive speed and topology setting
YesDrive 1 or the lowest numbered
existing drive
Drive hosting the library LUN
YesAll drives powered onDrive power
Default and restore defaults settings 171