HP StoreEver MSL6480 Tape Library User and Service Guide

Table 24 Informational events (continued)
MessageEvent code
Key on ESKM server created.9036
The library was rebooted.9037
The library was rebooted from RMI.9038
Token key creation attempt failed due to media being loaded in one or more drives.9039
Control path switched over from active to passive drive. This event code is used when the user initiates
the failover from the RMI.
9040
Key on KMIP server created.9041
Drive cleaning completed.9042
Drive cleaning was started.9043
Key from MSL encryption token migrated.9044
Library configuration data failed to duplicate onto the base module.9045
The chassis fan speed could not be determined. This is not a critical event. This fan provides enhanced
cooling for unusually high temperature environments. The chassis fan can be removed without interrupting
9046
the library operation. Remove the chassis fan, check for any obstructions in the fan, and reinsert it. If
the chassis fan event persists after it is removed and reinserted, the fan should be replaced when
convenient.
167