HP StoreEver MSL6480 Tape Library User and Service Guide

Table 24 Informational events
MessageEvent code
A tape alert flag was reported by a drive.9000
A drive is present in the system but powered off.9001
The library was powered on.9002
A move media command was executed.9003
Inventory scan was performed.9004
The library was powered down from the front panel.9005
The network interface was switched on.9006
The network interface switched off.9007
The system time was synchronized with an SNTP server.9008
A magazine was unlocked and opened.9009
A magazine was closed and locked.9010
A mailslot bank was unlocked and opened.9011
A mailslot bank was closed and locked.9012
A user logged in at the RMI interface.9013
A user logged out at the RMI interface.9014
A user logged in at the OCP interface.9015
A user logged out at the OCP interface.9016
MSL Encryption Kit password has changed.9017
MSL Encryption Kit password has been requested.9018
MSL Encryption Kit password has been created.9019
MSL Encryption Kit password has been set.9020
MSL Encryption Kit token has been initialized.9021
MSL Encryption Kit backup has been done.9022
MSL Encryption Kit restore has been done.9023
Drive support ticket created.9024
Library test started.9025
Library test successfully finished.9026
Library test stopped by user.9027
Configuration backup to base module was successful.9028
Configuration restore from base module was successful.9029
An invalid MSL Encryption Token was inserted.9030
Library health status changed to status “OK”.9031
Library health status changed to status “Warning”.9032
Library health status changed to status “Critical”.9033
A new system controller detected.9034
New library chassis detected.9035
166 Event codes