HP StoreEver MSL6480 Tape Library User and Service Guide

Table 22 Warning events (continued)
Details and solutionMessage and descriptionEvent code
unload any drives that need cleaning to initiate
autocleaning.
Check the source slot visually and rescan inventory.
Verify that the cartridge has a valid and readable
Medium source element empty.4073
Medium source element empty.4074
barcode label. Check the source slot visually and
rescan inventory. Verify that the cartridge has a
valid and readable barcode label.
Check the source element and ensure that there are
not obstructions in the pathway of the robot.
Cartridge lost while extracting it from the slot/drive.4075
Disable Secure Manager or install the necessary
Secure Manager license.
Secure Manager feature not licensed.4076
Table 23 Configuration change events
Message and descriptionEvent code
The configuration of a drive changed.8000
The drive was added or removed from the system.8001
A partition was added/removed or changed.8002
A mailslot bank was enabled/disabled.8003
Drive firmware changed due to firmware upgrade.8004
The configuration of hostname/domain name has changed.8005
The email configuration settings have been changed.8006
The configuration of a date/time format changed.8007
The system language setting changed.8008
The timezone configuration has changed.8009
The network settings have changed.8011
All expansion module upgraded. The firmware for all expansion modules has been upgraded.8012
The NTP time synchronization configuration has changed.8013
The SSH access was enabled/disabled.8014
Level of media generation checking has changed.8015
Library reset default settings invoked by user.8016
Library FW changed.8017
The Unlabeled Media Support configuration has changed.8018
Robotics firmware version upgraded.8019
A new key was created automatically.8020
Secure Manager status changed.8021
RMI/OCP Timeout configuration changed.8022
PLK/ESKM migration configuration changed.8023
Mailslot / Magazine access control configuration changed.8024
165