HP StoreEver MSL6480 Tape Library User and Service Guide

Unlocking the magazine
HP recommends unlocking the magazine using the OCP or RMI. If these methods fail, or if a
magazine needs to be removed when the power to the device is off, you can release the magazine
manually. Only one magazine or mailslot can be open at a time.
NOTE: As a best practice, perform this procedure while applications are idle. While the magazine
is extended, the library robotic assembly cannot move media.
Using the OCP or RMI
1. Log in as an administrator.
2. On the home screen, tap or click Open Magazine.
3. Click Open in the left or right magazine column within the module containing the magazine
to be opened.
CAUTION: Wait until the RMI indicates that the magazine has been unlocked before
attempting to remove it. Pulling on the handle while the library is unlocking the magazine
might damage the library.
144 Troubleshooting