HP StoreEver MSL6480 Tape Library User and Service Guide

Replacing magazine access doors
Removing the magazine access doors
1. Insert a small flat head screwdriver into the slot directly above the top hinge.
2. Use the screwdriver to pry the hinge free of the module while pulling the door toward you.
3. Remove the door from the module.
1
2
3
4
Installing the magazine access doors
NOTE: The doors are identical and can be mounted on either side of the module.
1. Orient the door so that the hinges are to the outside of the module.
2. With the door almost closed, insert the bottom hinge into the small recess on the module.
3. Snap the top hinge into place.
4. Verify that the door opens and closes normally.
1
2
Replacing magazine access doors 133