HP StoreEver MSL6480 Tape Library User and Service Guide

Using the RMI
1. Log in as an administrator.
2. On the home screen, click Open Magazine.
3. Click Open in the left or right magazine column within the module containing the magazine
to be opened.
CAUTION: Wait until the RMI indicates that the magazine has been unlocked before
attempting to remove it. Pulling on the handle while the library is unlocking the magazine
might damage the library.
4. Open the magazine access door.
NOTE: If not removed, the magazines and the mailslot will relock after the time configured on
the Configuration > Mailslots screen. The default is 30 seconds.
Using the manual release
1. Open the magazine access door.
2. Insert a small flat head screwdriver or Torx driver into the appropriate magazine release hole
and gently push the tab in.
IMPORTANT: Do not exert force once you encounter resistance. Doing so can damage the
device.
Replacing a magazine 115