Manualshelf

HP StoreEver MSL6480 Tape Library User and Service Guide

ManualsBrandsHP ManualsStorageHP StoreEver MSL6480 Scalable Base Module
111112113114115116117118119120
1
2
3. Slowly slide the drive power board out of the library.
2
1
Installing the new drive power board
1. Position the new drive power board onto the alignment rails.
2. Slide the drive power board into the library until seated firmly.
3. Push the latch up until it snaps into place; when the drive power board is installed correctly,
the latch will not be loose.
4. Align the tabs on the library with the slots at the top of the chassis fan assembly.
5. Push in the chassis fan assembly until it is flush with the back panel of the library.
6. Tighten the blue captive thumbscrews with your fingers to secure it to the library.
7. Plug in the AC power cords disconnected previously.
112 Upgrading and servicing the library