HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

8. Controller health status indicator7. Serial port (Factory use only)
9. USB port
Tape drive back panel overviews
Figure 4 LTO-5 Fibre Channel back panel
Figure 5 LTO-6 Fibre Channel tape drive back panel
2. Fan1. Magazine release hole
4. Tape drive power indicator3. Fibre Channel ports. Port A is above; Port B is below.
5. Tape drive Ethernet port
Figure 6 SAS tape drive back panel
2. SAS port. The LTO-4 and LTO-5 drives have one port;
the LTO-6 drive has two ports.
1. Magazine release hole
4. Tape drive Ethernet port (LTO-5 and LTO-6 only3. Fan
5. Tape drive power indicator
Figure 7 Parallel SCSI tape drive back panel
2. Fan1. Magazine release hole
4. Tape drive power indicator3. 68–pin parallel SCSI port
14 Features and overview