HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

ManualsBrandsHP ManualsStorageHP StoreEver 1/8 G2 LTO-5 Ultrium 3000 SAS Autoloader with Rack Kit Bundle/S-Buy

Table 30 Main error codes (continued)

Details and solutionDescriptionError code

This error can occur is an attempt is made to

upgrade a drive with the wrong personality or

version for that drive.

Firmware upgrade errorD7

• Ensure that the correct drive firmware is being

used to update the drive.

• If the correct drive firmware is being used,

update the autoloader firmware.

• Power cycle the device and attempt the

operation again.

Power-cycle the unit.Autoloader controller data base errorD8

114 Troubleshooting