HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes (AK377-96017, March 2010)

2. Download current firmware using L&TT.
3. Click the device to update in the device list.
4. Click Firmware on the main toolbar.
5. On the Update Firmware tab, select the box next to each device for which you want to update
firmware. If firmware is currently available for that device, it is shown in Firmware File in the File
Selection section of the screen.
6. Click Start Update at the bottom of the screen to begin the update.
Determining current version
To find the version of firmware installed on the Autoloader from the RMI, see the Support: Firmware
screen.
To find the version of firmware installed on the Autoloader from the OCP:
1. From the Home screen, press Next until the screen displays Status/Information. Press Enter to
select.
2. Press Next until the screen displays Autoloader information. Press Enter to select.
3. Press Next until the screen displays Firmware rev.. Press Enter to select.
Supersedes history
All versions not listed are inactive. Versions marked manufacturing only are not available for download.
StatusReleasedFirmware version
Active5/18/20092.60
Active3/22/20103.00
Effective date
March 22, 2010
HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes 5