Recovering Segment Server after HDD Failure

5. Now fix the Up, infailover status for ibrix2 by forcing the failover for ibrix2 from the FM [with -
p pwr off is recommended]
#/usr/local/ibrix/bin/ibrix_host -f -p -F -M -h ServerName
..starting failover
..migrating segments
..operation successful
6. Now ibrix_host -l -S status should be
ibrix1 Up
ibrix2 Down, FailedOver
7. Power on ibrix2 after fail over is succesful
#/usr/local/ibrix/bin/ibrix_host -P on -h ServerName
8. Failback ibrix2 now
#/usr/local/ibrix/bin/ibrix_host -f -U -h ServerName
9. Confirm status of both servers is Up in the ibrix_host -l -S command output and finally
ensure FS is accessible from all servers ..ie ls -laR /FSNAME
IBRIX_S000045.pdf
Last modified: 8/5/2008