HP StorageWorks Disk Array XP operating system configuration guide: Windows NT (A5951-96023, December 2005)

Install and configure the host
This section explains how to install and configure the host and host bus adapters (HBAs)
that connect the host to the disk array.
Loading the OS and software
Follow the manufacturer’s instructions to load the operating system and software onto
the host. Load all OS patches and configuration utilities supported by HP and the HBA
manufacturer.
If you purchased multipath software, install it according to the manufacturer’s instructions.
Installin
gandconfiguring the HBAs
Install an
dconfigure the host b us adapters using the HBA m a nufacturer’s instructions.
HP supplie
s driver, firmware, and BIOS downloads for commonly available HBAs.
These downloads contain HBA settings that are tested and approved by HP. To obtain
adownload,gotow
ww.hp.com and search for the model name or number of your
HBA. Download the file, and follow the installation instructions in the “readme” or
documentation file supplied with each download.
For addi
tional notes on HBA settings, refer to Appendix C.
18
Installation