HP StorageWorks Disk Array XP Operating System Configuration Guide: DYNIX (A5951-96200, October 2004)

16 HP StorageWorks Disk Array XP Operating System Configuration Guide: DYNIX/ptx
Fabric and Connection parameter settings
You can set each array port to FABRIC ON or OFF with connections of
POINT-TO-POINT or FC-AL as shown in the following table and figures.
For detailed topology information, refer to the HP StorageWorks SAN
Design Reference Guide on the
hp.com website.
Fabric
Parameter
Connection
Parameter
Provides
ON FC-AL Not supported
ON Point-to-Point N-port (SAN fabric port)
OFF FC-AL Not supported
OFF Point-to-Point Not supported