HP StorageWorks Disk Array XP operating system configuration guide (A5951-96014, August 2004)

Installation 15
Installation procedures
The HP representative and you perform the following procedures.
1. “Install and configure the disk array” (page 16).
“Setting the Host Mode for the disk array ports”
“Setting the System Option Modes”
“Configuring the Fibre Channel ports”
2. “Install and configure the host” (page 20).
“Loading the OS and software”
“Installing and configuring the HBAs”
“Clustering and Fabric zoning”
“Fabric zoning and LUN security for multiple operating systems”
3. “Connect the disk array” (page 23).
“Defining the paths”
“Verifying HBA installation”
“Verifying device recognition”
4. “Configure disk array devices” (page 28).
“Verifying the device files and drivers”
“Creating the device files”
“Creating the physical volumes”
“Creating new volume groups”
“Creating logical volumes”
“Creating the file systems”
“Setting the I/O timeout parameter”
“Creating the mount directories”
“Mounting and verifying the file systems”
“Setting and verifying the auto-mount parameters”