HP StorageWorks XP12000 Disk Array Site Preparation Guide (AE002-96040, March 2008)

SpecificationCondition
Horizontal, incline impact: 1.22 m/sVertical, rotational
edge: 0.1 m
Shipping and storage (in factory packing)
Acoustic specifications
The acoustic emission specifications for the disk array are:
8.27 Bels (A) sound power
65 dB (A) sound pressure, operator position (1 meter from the floor and surface of the rack)
You can reduce the ambient noise level caused by equipment and air conditioning blowers in your
computer room by:
Installing a dropped ceiling covered in commercial-grade, fire-resistant, acoustic-rated, fiberglass
ceiling tile
Covering the walls in sound-deadening material
Installing foam rubber removable partitions
Heat dissipation, power consumption, and air flow
Table 15 describes the heat dissipation and power consumption of the HP XP12000 disk array when
loaded with the maximum number of disk drives.
Table 15 Maximum heat dissipation and power consumption specifications
Full array (1 DKC and 4
DKUs)
Each DKUDKCParameter
37.87. 57. 9Power consumption (kVA)
35.56.97. 8Heat dissipation (kW)
1213692369826577BTUs per hour
3058459726697kcal per hour
Table 16 shows frame air flow requirements.
Table 16 Air flow specifications
Air flow(cubic meters/minute)DescriptionProduct No.
44HP XP12000 Disk Control Frame (DKC)AE002A
31HP XP12000 Disk Array Frame (DKU)AE045A
Table 17 presents the heat dissipation and power requirements of individual components.
Table 17 Component heat dissipation and power consumption specifications
Power
Consumption(kVA)
Heat
Output(kW)
DescriptionProduct No.
1.2191.178HP XP12000 Disk Control Frame (DKC)AE002A
XP12000 Disk Array Site Preparation Guide 39