HP StorageWorks XP12000 Disk Array owner's guide (AE002-96029, October 2006)

Item
Label Indicator
Description
5
REMOTE
MAINTENANCE
PROCES SING
LED
(Amber)
During normal operation, this LED m ay be
on if remote maintenance is allowed (the
REMOTE MAINTENANCE ENABLE/DISABLE
switch is in the ENABLE position).
ON: Remote maintenance is in progress.
An HP support representative is probably
working on the system, but the system is online
and accepting data.
6
REMOTE
MAINTENANCE
ENABLE/DISABLE
Switch Used to permi
t remote service mainte-
nance. Durin
g normal operation, this switch
should be in
the ENABLE position.
DISABLE: No
one can pro-
vide remot
e maintenance.
ENABLE: An
HP support representative
can provi
de remote maintenance.Do not change
the switc
hpositionunlessdirectedtodosoby
HP servi
ce personnel.
7
BS-ON
LED
(Amber)
During normal operation, this LED should be on.
ON: The disk array is plugged in and
receiving power from the primary AC outlet.
TheSVPisreceivingpowerfromtheoutlet.
OFF: The disk array is not receiving power from
the primary AC outlet. Check the electrical
outlets in your building.
8
PS-ON
LED
(Green)
During normal operation, this LED should be on.
ON: The PS ON/OFF switch is on. If the
SUB-S Y S TEM READ Y light (1) is also on,
the disk array is ready to receive data.
OFF: The PS ON/OFF switch is off and the disk
array is not ready to receive data.
9
PS ENABLE
Switch
U
sed to enable the PS ON/OFF switch
(10). During normal operation, this
switch should be in the “Disable”
position (opposite the ENABLE position).
ENABLE: The PS ON/OFF switch can be used.
DISABLE: The PS ON/OFF switch cannot be
used. Do not change the switch position unless
directed to do so by HP service personnel.
HP StorageWorks XP12000 Disk Array
25