HP StorageWorks XP SNMP Agent Reference Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96056, May 2011)

Component Status Information
You can obtain the status information for certain storage system components from an SNMP
manager. Table 1 (page 6) lists the components for which the status can be obtained.
Table 1 Available Component Status Information
Component NameArea
ProcessorDisk Controller
BUS
Cache
Shared memory
Power supply
Battery
Fan
Others
Power supplyDisk Unit
Fan
Others
Drive
The following status is indicated for each component status as well as the trap report function.
Table 2 Subsystem Component Status Types
DescriptionStatus
Normal operation.Normal
All operations in a storage system stopped.Acute failure detected
Operation in a component where a failure occurred stopped.Serious failure detected
Partial failure.Moderate failure detected
Minor failure.Service failure detected
6 Overview of SNMP