HP StorageWorks XP SNMP Agent Reference Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96056, May 2011)

Table 13 Subsystem Component Information (continued)
AttributeMIB ValueDescriptionTypeName
read-onlyNote
(1 digit)
Status of cache.INTEGERDKCHWCache
::=dkcHWEntry(4)
read-onlyNote
(1 digit)
Status of shared
memory.
INTEGERDKCHWSM
::=dkcHWEntry(5)
read-onlyNote
(1 digit)
Status of power supply.INTEGERDKCHWPS
::=dkcHWEntry(6)
read-onlyNote
(1 digit)
Status of battery.INTEGERDKCHWBattery
::=dkcHWEntry(7)
read-onlyNote
(1 digit)
Status of fan.INTEGERDKCHWFan
::=dkcHWEntry(8)
read-onlyNote
(1 digit)
Others.INTEGERDKCHWEnvironment
::=dkcHWEntry(9)
NOTE: The status of each component is indicated as follows:
1: Normal.
2: Acute failure detected.
3: Serious failure detected.
4: Moderate failure detected.
5: Service failure detected.
raidExMibDKUHW
raidExMibDKUHW indicates the status of the subsystem components.
dkuHWEntry
dkuHWEntry indicates the status of the disk unit components.
26 SNMP Supported MIB