HP StorageWorks XP SNMP Agent Reference Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96056, May 2011)

5 SNMP Supported MIB
Trap Configuration
Extension Trap Specifications
The specifications of the supported extension trap are as follows.
Table 6 Extension Trap Specifications
Mounting ValueSpecificationOperation
—Specified community nameSNMP Community
4Trap PDUProtocol Data Unit (PDU) Type
1.3.6.1.4.1.116.3.11.4.1.1Agent IdentifierEnterprise ID
—Agent IP AddressAgent IP Address
—EnterpriseSpecificGeneric Trap Code
—See Table 7 (page 19).Specific Trap Code
Table 7 Specific Trap Codes
DescriptionNameSpecific Trap Code
Failure report: All operations in a subsystem stopped.RaidEventUserAcute1
Failure report: Operation in a component where a
failure occurred stopped.
RaidEventUserSerious2
Failure report: Partial failure.RaidEventUserModerate3
Failure report: Minor failure.RaidEventUserService4
Extension Trap Protocol Data Unit (PDU)
Failure Report Trap
An extension trap protocol data unit (PDU) includes the product number of the device that
experienced the failure, the device nickname, and a failure reference code. If you obtain the
information with GetRequest command, access the MIB by using the product number of the device
as an index.
Table 8 Failure Report Trap
DescriptionTypeObject IdentifierName
The product number of the
device that experienced the
failure.
INTEGER1.3.6.1.4.1.116.5.11.4.2.1EventTrapSerialNumber
The device nickname.DisplayString1.3.6.1.4.1.116.5.11.4.2.2EventTrapNickname
The failure reference (see
Table 7 (page 19)).
DisplayString1.3.6.1.4.1.116.5.11.4.2.3EventTrapREFCODE
The area where the failure
occurred (see note).
OBJECT
IDENTIFIER
1.3.6.1.4.1.116.5.11.4.2.4EventTrapPartsID
Failure occurrence date.DisplayString1.3.6.1.4.1.116.5.11.4.2.5EventListDate
Failure occurrence time.DisplayString1.3.6.1.4.1.116.5.11.4.2.6EventListTime
Trap Configuration 19