HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Preface
About this guide
This g uide provides information about:
• Requirements and procedures for conne cting an X P disk array to a host system
• Configuring the disk array for use with the MPE/iX operating system
Intended audience
This guide is in
tended for system adm inistrators with knowledge of:
• The host hardware
• MPE/iX operating system
• XP disk arrays
Disk arrays
Unless otherwise noted, the term “disk array” refers to these disk arrays:
• HP StorageWorks Disk Array XP128
• HP StorageWorks Disk Array XP1024
• HP StorageWorks XP10000 Disk Array
• HP StorageWorks XP12000 Disk Array
Related doc
umentation
The following documents provide related information:
• HP StorageWorks Disk Array XP128: O wner’s Guide
• HP Storage
Works Disk Array XP1024: Owner’s Guide
• HP StorageWorks XP10000 Disk Array: Owner’s Guide
• HP StorageWorks XP12000 Disk Array: Owner’s Guide
You can find these do cuments on the storage web site:
h
ttp://h18006.www1.hp.com/s torage/xparrays.html
Refer to the HP website http://docs.hp.com/mpeix/all/#Fibre%20Channel for the
followi
ng HP e3000 MPE/iX system documentation:
Disk Array XP operating system configuration guide: MPE/iX
5