HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Click on the Name Server button to acc ess the Nam e Server display, and the switch will
present a display name server table similar to the one that follows.
You should already know the port number of the plug-in port on the Fibre Channel switch
where you have conne cted the disk array. If necessary, trace the Fibre Channel cable
from the disk array to the switch and determine the port to which the a rray is conne cted.
In th
e figure above, the disk array is connected to p ort 5 of the switch. Note the disk
mod
el information in the “Symbolic Name” portion of the Name Server display, at
therightonthelineforPort#5.
Disk Array XP operating system configuration guide: MPE/iX
47