HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Example
STARTING EXE CU TION OF MAPPER2
Processor Id en ti
fication:
Hardware Mode l:
5CBH, Revis io n: 0
Software Mode l: 4H, Revision: 0
……
I/O Configur at i
on:
Type HW SW Revisions
Path Component N am e ID Model Mod el Hdwr Firm
---------- - -
-------------------- ----- ----- ----- ----- - ----
0 Astro BC Runway Port CH 582H BH 0 0
0/0 Elroy PCI Bri dge DH 782H AH 0 0
0/0/0/0 E th er
net Control le r 1011H 0019H 103CH 104FH 41H
……
0/6/0/0 H P 6795A 2G/1G Fibr.. . 103CH 1029H 103CH 128CH 0BH
0/6/0/0.8.0.102.0.0.0
HP OPEN-3 - - -
- 0118
0/6/0/0.8.0.102.0.0.1
HP OPEN-3 - - - - 0118
0/6/0/0.8.
0.102.0.0.2
HP OPEN-3 - - - - 0118
0/6/0/0.8.0.102.0.0.3
HP OPEN-3 -
---0118
4. Exit the ODE environment back to the ISL> prompt, and set the desired primary
boot path.
Example
ODE> exi
t
ISL> primpath 0/6/0/0.8.0. 102.0.0.2
5. Now INSTALL the OS software from the SLT on the alternate boot path to the
selected disk array device on the primary boot path.
Example
ISL> install
……
6. When finished loading the OS software, return to the main body of this document
at Configure the disk array devices in MPE/iX.
Disk Array XP operating system configuration guide: MPE/iX
45