HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Example
CSYLE18<PUB.SYS>: shutdown system
SESSION aborted b
y system management. (CIERR 6027)
CPU=2. Connect=60. TUE, AUG 24, 2004, 3:53 PM.
15:53/#S2/46/LOGOFF ON LDE V #20.
Spoolers notified of a shutdown. (Shut 16)
15:53/47/The Sp
ooling system has been shutdown.
Shutdown of system processes begins. (Shut 4)
Shutdown of system managers begins. (Shut 5)
Shutdown of ope
rating system complete. (Shut 6)
6. Set the system’s primary boot path to the BOOT M E NU PATH you noted in step
4above.
Example
Main Menu: Enter command or
menu > pa pri 0
/6/0/0.8.0.102.0.0.2
Primary boot path: 0/6/0/0.8.0.102.0.0.2
0/6/0/0.8.
0.66.0.0.2(hex)
7. You can now INSTALLthe OS software from the SLT (System Load Tape) on the
alternate boot path to the selected disk array device on the primary boot p ath.
Example
Primary boot path: 0/6/0/0.8.0.102.0.0.2
Alternate boot path: 0/0/2 /0.6
Console
path: 0/0/4/0.0
Keyboard path: 0/0/4/0.0
Main Men
u: Enter command o r menu > bo alt
Interact with IPL (Y, N, or Cancel)?> y
Bootin
g...
Boot IO Dependent Code (IODC) revision 1
SOFT B
ooted.
TAPEIPL Version 1.0
ISL loaded
ISL Revision A.00.43 Apr 12, 2000
ISL>
install
……
8. When you are fini
shed loading the OS software, return to the main bo dy of this
document at Co
nfigure the disk array devices in MPE/iX.
Disk Array XP operating system configuration guide: MPE/iX
43