HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Example
CSYLE18<P UB. SYS>:ioconfig
IOCONFIG A.0 0.00 (catalog A.00.00)
(c) 1994 Hewlett-Packard Co . All Rights Reserve d
ioconfig: lpa th
path=0/6
PATH: *0/6 LDEV:
ID: PAT_PCI_BC TYPE: BC
PMGR: PCI_ELRO
Y_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
ioconfig: lpa
th path=0/6/ 2
Warning: Pat h doesn’t exist. (IO CONFIG 37)
ioconfig:
ioconfig: apa th path=0/6/2; id =pci_device
ioconfig: ap
ath path=0/ 6/2/0; id=a5159 a
ioconfig: apa th path=0/6/2/0.0; id=pseudo
ioconfig: ade v ldev=300; path=0/6/2/0.0.0; id=hpdarr ay
Class(es) u
pdated, so rerun asoctbl.p ub.sys to recreat e
asociate. pub .sys.
BEGIN VOLU
ME MOUNTING ON LDEV 300 (AVR 9)
UNKNOWN VOLU ME MOUNTED ON LDEV 300 (AVR 15)
ioconfig: ade v ldev=301; path= 0/6/2/0.0.1; id=hpdarray
Class(es)
updated, so rerun asoctbl.p ub.sys to recreat e
asociate. pub .sys.
BEGIN VOL
UME MOUNTING ON LDEV 301 (AVR 9)
UNKNOWN VOLU ME MOUNTED ON LDEV 301 (AVR 15)
ioconfi
g:adev ldev= 302; path=0/6/2 /0.0.2; id=hpda rra y
Class(es) up dated, so rerun asoctbl.pub.sys to recreate
asociate. pub .sys.
BEGIN V
OLUME MOUNTI NG ON LDEV 302 (AVR 9)
UNKNOWN VOLU ME MOUNTED ON LDEV 302 (AVR 15)
iocon
fig:exit
keeping to group CONFIG.SYS
Purge old configuration (ye s/no)?Automatic yes
** con
figurati on files successfu lly saved **
CSYLE18<P UB. SYS>:
8. Run VOLUTIL to create volume sets and volumes as explained in the next section.
28
Installation