HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Example

ODE> run mapper 2

STARTING EXE CUTION OF MAPPER2

Processor Id ent

ification :

Hardware Mode l: 5CBH, Revis ion: 0

Software Mode l: 4H, Revisio n: 0

……

I/O Configur ation:

Type HW SW Revisions

Path Componen

t Name ID Model Model Hdw r Firm

--------- - ------------------------ --- -- ----- ----- ----- -----

0 Astro BC Ru nw ay Port CH 582H BH 0 0

0/0 Elroy PCI Bridge DH 782H AH 0 0

0/0/0/0 E the

rnet Control ler 1011H 0019H 103CH 104FH 41H

……

0/6 Elroy PCI Bridge DH 782H AH 0 0

0/6/2/0 S ym

bios SCSI Controller 1000H 000FH 103CH 12C0H 37H

0/6/2/0.0 .0 HP OPEN-3 - - - - 0118

0/6/2/0.0 .1 HP OPEN-3 - - - - 0118

0/6/2/0.0

.2 HP OPEN-3 - - - - 0118

0/6/2/0.0 .3 HP OPEN-3 - - - - 0118

……

Resetting the Boot Device...

Done.

Exiting.. .

RUN COMPLETE D.

ODE>

4. For the newly ad ded disk array, the SCSI HBA is at I/O path 0/6/2/0, and the

disk array LUNs are at I/O paths 0/6/2/0.0.0, 0/6/2/0.0.1, 0/6/2/0.0.2,

and so on.

5. Exit back to ISL> prompt.

Example

ODE> exit

6. Start the OS on the primary boot path.

Example

ISL>

start noreco very group=conf ig

7. Use IOCONFIG to conﬁgure the SCSI HBA and SCSI disk Ldevs.

Disk Array XP operating system conﬁguration guide: MPE/iX