HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Example
CSYLE18<P UB. SYS>:ioconfig
IOCONFIG A.0 0.00 (catalog A.00.00)
(c) 1994 Hewlett-
Packard Co. All Rights Reserved
MON, AUG 23, 2 004 , 5:38 PM
ioconfig: apa th
path=0/4/ 0/0 .70962; id=fc_n port
ioconfig: ade v ldev=100; path=0/4/0/0.70962.0; id=hp da rray
Class(es) up dated, so rerun asoctbl.pub.sys to recreate
asociate. pub .sys.
BEGIN VOLUME MOUNTING ON LDEV 100 (AVR 9
UNKNOWN VOLU ME MOUNTED ON LDEV 100 (AVR 15)
ioconfig: ade v ldev=101; path= 0/4/0/0.70962.1; id=hpdarray
Class(es) up dated, so rerun asoctbl.pub.sys to recreate
asociate. pu
b.sys.
BEGIN VOLUME MOUNTING ON LDEV 101 (AVR 9
UNKNOWN VOLU ME MOUNTED ON LDEV 101 (AVR 15)
ioconfig: apa th path=0/6/0/0.70962; id=fc_n port
ioconfig: ade v ldev=200; path=0/6/0/0.70962.0; id=hp da rray
Class(es)
updated, so rerun asoctbl.p ub.sys to recreat e
asociate. pub .sys.
BEGIN VOL
UME MOUNTING ON LDEV 200 (AVR 9)
UNKNOWN VOLU ME MOUNTED ON LDEV 200 (AVR 15)
ioconfig: ade v ldev=201; path=0/6/0/0.70962.1; id=hp da rray
Class(es) up dated, so rerun asoctbl.pub.sys to recreate
asociat
e.pub.sys.
BEGIN VOLUME MOUNTING ON LDEV 200 (AVR 9)
UNKNOWN
VOLUME MOUNTED ON LDEV 200 (AVR 15)
ioconfig: exi t
keepin
g to group CO NFI G.SYS
Purge old configuration (ye s/no)?Automatic yes
** configura tion files successfully saved **
CSYLE18<P UB. SYS>:
4. Confirm with the DSTAT command and then create volume sets and volumes on
the new XP disk array devices.
Configuring with SC
SI-FC fabric router disk array attachment
Configure disk arra
y devices attached through the SCSI-FC Fabric Router in the same
way as for other SC
SI disk devices. No special M PE/iX configu ration steps are
required. Howev
er, before proceeding read the g uidelines in the "Jazz Router Paper" at:
h
ttp://jazz.e
xternal.hp.com/mpeha/papers/router_paper01.htm
24
Installation