HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

Install and configure the disk array
The HP service representative performs these tasks:
• Assembling hardware and installing software
• Loading the mi
crocode updates
• Installing and formatting devices
After these tasks are finished, you will use Remote Web Console, Command View,
Command View XP Advanced Edition, or LUN Configuration and Security Manager to
complete the remaining tasks listed below. If you do not have these programs, your H P
service representative can perform these tasks for you.
Setting the host mode for the disk array ports
After the disk array is installed, you must set the host m ode for each disk array port to
match the host OS. Set the host mod e using LUN Manager in Remote Web Console XP
(shown), Command View XP, or Command View XP Advanced Edition. If these are not
available, the HP service representative can set the host mo d e using the SVP.
ThehostmodesettingforMPE/iXis08.
Disk Array XP operating system configuration guide: MPE/iX
13