HP StorageWorks Disk Array XP operating system configuration guide: MPE/iX (A5951-96145, November, 2005)

SNMP configuration
The XP family of disk arrays supports standard Simple N etwork Management Protocol
(SNMP) for remotely managing the disk array. The SNMP agent on the service processor
(SVP) performs error-reporting operations requested by the SNMP manager. SNMP
properties are usually set from the SVP but they can also be set remotely using Remote
Web Console XP, Command View XP, or Command View XP Advanced Edition. Refer to
the applicable user’s guide for procedures.
Refer to the operating system documentation to configure the SNMP man ager on the host.
RAID Manager command devices
RAID Manager manages Business Copy (BC) or Continuous Access (CA) operations
from a host server. To use R AID Manager with BC or CA , you use Remote Web Console,
Command View, or Command View XP Advanced Edition to designate at least one LDEV
as a command device. Refer to the applicable user’s guide for information about how to
designate a command device.
CAUTION:
An LDEV designated as a command device cannot contain a ny MPE/iX files or
data. Create a single member volume set through the VOLUTIL utility program. Then
VSCLOSE it, SCRATCHVOL it, and convert it to a command device.
Disk Array XP operating system configuration guide: MPE/iX
11