HP StorageWorks Disk Array XP operating system configuration guide for NonStop XP24000, XP12000, XP10000, XP1024, XP128, v01 (A5951 - 96222, June 2007)

Conventions for storage capacity values
Use the following values to calculate physical storage capacity (hard disk drives) for HP XP storage
systems:
• 1 KB (kilobyte) = 1,000 bytes
•
1 MB (megabyte) = 1,000
2
bytes
•
1 GB (gigabyte) = 1,000
3
bytes
•
1 TB (terabyte) = 1,000
4
bytes
Use the following values to calculate logical storage capacity (logical devices) for HP XP storage
systems:
• 1 KB (kilobyte) = 1,024 bytes
•
1 MB (megabyte) = 1,024
2
bytes
•
1 GB (gigabyte) = 1,024
3
bytes
•
1 TB (terabyte) = 1,024
4
bytes
• 1 block = 512 bytes
Window illustrations
The windows shown in this guide were displayed on a Windows computer with the Internet Explorer
browser. The windows may appear different on your computer depending on the operating system
and browser being used. Window contents also vary depending on installed program products and
the storage system being managed.
HP technical support
For worldwide technical support information, see the HP support website:
http://www.hp.com/support.
Before contacting HP, collect the following information:
• Product model names and numbers
• Technical support registration number (if applicable)
• Product serial numbers
• Error messages
• Operating system type and revision level
• Detailed questions
Subscription service
HP recommends that you register your product at the Subscriber's Choice for Business website:
http://www.hp.com/go/e-updates.
After registering, you will receive e-mail notification of product enhancements, new driver versions,
firmware updates, and other product resources.
XP Disk Array Configuration Guide for NonStop 9