HP Replication Adapter for VMware vCenter Site Recovery Manager Administrator Guide (5697-2491, February 2013)

1301 : [RMSRA20][Time]: [command_main] : XML length over –> [ XML parameter strings
… ].
Cause: A parameter in XML was input from SRM to the SRA, but it exceeds the defined length for
the SRA specification.
Action: Confirm that SRM was passed appropriate parameters in XML from the SRM log message.
1302: 1303 : [RMSRA20][Time]: [command_main] : Parameter in XML was NOT enough
Cause: A parameter in XML was input from SRM to the SRA, but it could not be found in any
parameters.
Action: Confirm that SRM was passed appropriate parameters in XML from the SRM log message.
1304 : [RMSRA20][Time]: [command_discoverDevices] : NO ArrayId or NO PeerArrayId
in XML.
Cause: A parameter in XML (discoverDevices) was input from SRM to the SRA, but it could not be
found in the array ID.
Action: Confirm that SRM was passed an Array ID parameter in XML (discoverDevices) from the
SRM log message.
1305 : [RMSRA20][Time]: [command_naming] : NO ArrayId or NO DeviceKey and
GroupKey in XML.
Cause: A parameter in XML (naming) was input from SRM to the SRA, but it could not be found in
the TargetDevice Key (LDEV# of CA_SVOL), or Target Group Key (dev_group in HORCM).
Action: Confirm that SRM was passed TargetDevice Key parameter in XML (naming) from the SRM
log message.
1305 : [RMSRA20][Time]: [command_naming] : NO ArrayId or NO PeerArrayId or NO
DeviceKey and GroupKey in XM.
Cause: A parameter in XML (naming) was input from SRM to the SRA, but it could not be found in
SourceDevice ID (LDEV# of CA_SVOL), or Consistency Group ID (dev_group in HORCM).
Action: Confirm that SRM was passed SourceDevice ID parameter in XML (naming) from the SRM
log message.
1306 : [RMSRA20][Time]: [command_naming] : Unsupported command 'command naming'
in XML.
Cause: A command name was input from SRM to the SRA, but it could not be supported.
Action: Confirm that SRM was passed an appropriate command name in XML from the SRM log
message.
1251 : [RMSRA20][Time]: [command_main] : Can't be connected to HORCMINST=X@…
with error(0x000000fc).
Cause: A connection address in XML was input from SRM to the SRA, but it could not be found
HORCM instance #X.
Action: Confirm that the HORCM instance# is running , or that a connection address (IPaddress),
specified in the configuration of Array Manager, is appropriate.
RAID Manager command errors in rmsra20.exe
1307 : [RMSRA20][Time]: [“ XML OUTPUT file name”] : fopen : “system error message”
Cause: A parameter in XML was input from SRM to the SRA, but it could not be created as an XML
OUTPUT file name.
Error Messages on SRM log files 45