HP Replication Adapter for VMware vCenter Site Recovery Manager Administrator Guide (5697-2491, February 2013)

• For an RMSRA20 configuration using local connection, enter the HORCM instance to
connect to the RAID Manager instance via RMSRA20, specifying the following formats:
Figure 26 Configure the virtualization adapter for local configuration
◦ Enter HORCMINST=X to connect to HORCMINST=X on the Windows Host. Enter
Username & password as dummy.
NOTE: If the array is set as the authentication mode command device, Enter
Username & password (sraadmin) for the array user.
Verify that the Array Manager summary screen shows SRA is the HP StorageWorks XP
Virtualization Adapter.
Figure 27 (page 39) shows a sample screen shot of the Array Manager summary screen.
38 Configuring SRM and P9000 (XP) disk array