HP XP P9000 Storage Replcation Adapter 2.0 Administrative Guide

Table 3 Failover Action and Configurations (continued)
Failover actionsComponent nameSRM component
testfailoverFailover
Split = trueSplit = false
AvailableAvailableUnused. See
Note 2
+CoW (at time
split ) See Note 3
AvailableAvailableUnused. See
Note 2
+BC/CoW
(without at time
split )
Legend: Fail means that RMSRA20 returns with error. Unused means that RMSRA20 does not use it
Note 1. The conditions that testFailover will be executed on CA/UR_SVOL are:
• BC licence is not installed (this does not register as Group for BC).
• SRM or $SplitReplication variable specifies <SplitReplication> = true.
Or
• BC licence is installed.
• SRM or $SplitReplication variable specifies <SplitReplication> = true.
• MU# except 0 is specified as $RMSRATMU variable. (this specifies MU# that does not register
as Group for BC).
• The $RMSRATMU variable should be specified MU# that does not exist as a group for BC on
horcm*.conf.
Example for local configuration
For ENV on windows:
• SplitReplication=true
• RMSRATMU=1
Example for remote (Telnet) configuration
Figure 10 (page 21) provides an example of a remote configuration.
20 VMware Site Recovery Manager overview