HP StorageWorks XP10000 Disk Array Site Preparation Guide (AE102-96014, March 2008)

specifications apply to all three axes. For vibration testing methods, see ASTM D999-91 Standard
Methods for Vibration Testing of Shipping Containers.
Table 8 Mechanical vibration specifications
SpecificationCondition
0.25 mm, 5–10 Hz
0.05 G, 10–300 Hz
Operating
2.5 mm, 5–10 Hz
0.5 G, 10–70 Hz
0.05 mm, 70–99 Hz
1.0 G, 99–300 Hz
Nonoperating
0.5 G, 15 minutes (at four most severe resonances between
5–200 Hz)
Shipping and storage (product packed in
factory packing)
Shock specifications
Table 9 lists shock specifications. For horizontal shock testing methods, see ASTM D5277-92 Standard
Test Methods for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester. For
vertical shock testing methods, see ASTM D6055-96 Standard Test Methods for Mechanical Handling
of Unitized Loads and Large Shipping Cases and Crates.
Table 9 Shock specifications
SpecificationCondition
NoneOperating
8 G, 15 msNonoperating
Horizontal: Incline impact: 1.22 m/s
Vertical: Rotational edge: 0.1 m
Shipping and storage (product packed in factory
packing)
Heat dissipation, power consumption, and air flow specifications
Table 10 describes the heat dissipation and power consumption of the XP10000 disk array when
loaded with the maximum number of disk drives.
Table 10 Maximum heat and power specifications
Full arraySecond RackPrimary RackParameter
8.13.24.9
Power consumption
(kVA)
7. 63.04.6
Heat dissipation
(kW)
259551024615710BTUs per hour
654125823959Kcal per hour
XP10000 Disk Array Site Preparation Guide 33