HP StorageWorks XP10000 Disk Array Site Preparation Guide (AE102-96014, March 2008)

lbkgDescriptionProduct
2.21HP XP10000 146-GB 15k-rpm Spare DiskAE122AS
8.84HP XP10000 300-GB 10k-rpm Array GroupAE123B
2.21HP XP10000 300-GB 10k-rpm Spare DiskAE123BS
8.84HP XP10000 300-GB 15k-rpm Array GroupAE128A
2.21HP XP10000 300-GB 15k-rpm Spare DiskAE128AS
8.84HP XP10000 400GB 10k rpm Array Group-4 disksAE125A
2.21HP XP10000 400GB 10k rpm Spare DiskAE125AS
Calculating the weight of your disk array configuration
The total weight of your array configuration includes the controller, the disk chassis, plus the total of
all disk drives in each cabinet and any optional components. Your site must have adequate floor
strength to support the total weight of the array, from the delivery area to the computer room.
To calculate the total weight of your unpackaged array configuration, fill in the following worksheet
with component weights in kilograms or pounds. A completed worksheet is illustrated on the following
page.
Later you will use the calculated total weight to estimate the required floor load rating for the computer
room (see .
Total weightQuantityWeightDescriptionPart Number
XP10000 Disk Array Site Preparation Guide 21